LCD LCD touch screen use precautions
The following 12 points should be paid attention to when using the LCD touch screen: first, touch the glass surface of the LCD screen is the touch surface, that is, the front of the product. Second, the touch LCD screen part is glass products, and the glass corners are relatively sharp. Please wear gloves/finger covers when assembling. Third, the touch LCD screen part is fragile glass products, do not exert strong impact on the touch LCD panel during assembly. Fourth, avoid taking the lead wire directly, picking up and touching the LCD screen, and avoid pulling the leading-out line. Fifth, bending action cannot be carried out on the reinforcement plate part of the lead-out line. Sixth, any part of the lead-out line is not allowed to be folded in half. Seventh, the outgoing line must be inserted horizontally during assembly, and cannot be inserted in half at the root of the reinforcing plate. Eighth, when picking and placing products, it is necessary to operate on a single piece. Take it lightly to avoid products colliding with each other and scratching the surface of the products. Ninth, when cleaning the surface of the product, please use soft cloth (Deerskin)Wipe with petroleum ether. Tenth, do not use corrosive organic solvent to wipe and touch the surface of the liquid crystal screen film. Such as industrial alcohol. 11th. Do not stack and place the touch LCD screen. Use the tray. 12th. Please pay attention to the following matters in assembly design and frame design: a. The pillar fixing the frame of the touch LCD screen must be outside the visual area of the touch LCD screen. B. The frame edge must be outside the operation area of the touch LCD, and the frame edge cannot have pressure action from the visual area to the operation area. c. It is suggested that the material of the fixed touch screen should be plastic material, and the front part of the touch screen should be padded with soft material. d. Do not stick to the surface of the touch LCD with corrosive adhesive.